Best Charter Remote Codes With Programming Instructions (2023)

Last Updated on April 30, 2023 by Randall

For persons who have whistling issues, cable TV offers a range of remote controllers. The next step is to set your new remote control to operate with your TV, cable TV, DVD player, and/or audio device. However, not all paper remote controllers are created equal, and the programming procedure differs significantly depending on the model.

If you’re looking for Charter Remote Codes, you’ve come to the right place. Charter Remote not only offers communication services but also offers television services under the Spectrum brand. When you acquire services, the branding is determined by when you buy them. If you purchase the services after 2014 or before 2014, you will receive a discount.

Here you will learn about the charter universal remote codes as well as how to program the charter remote. Then you’ve come to the correct spot since here you’ll find everything you need for programming your remote control.

(Video) How to Charter Cable All Remote codes for programming your remote!

You can operate a variety of gadgets with the charter universal remote control. You must, however, program it for this. So, don’t get confused between the remote control and the television. And then begin utilizing the charter universal remote control. All of the charter remote codes are shown here; simply scroll down to get your charter remote tv codes. Continue reading to learn about the programming process.

Charter Remote Codes List

LG1423, 0178, 0017, 1768
RCA2434, 2746, 2932, 0047, 2183, 3382, 0051, 1661, 1958, 1959, 1868, 0090, 2855, 3577, 3717
Sony0810, 1685
Panasonic1480, 1927, 1947, 1925, 0051
Samsung2051, 1959, 0178, 0812
Philips1867, 1454, 2597, 0171, 1365, 1990, 2492, 2622, 2992
Toshiba1524, 1343, 1369, 1935, 1959
Magnavox1867, 1454, 2597, 1755, 0171, 0051, 1365, 1913, 1963, 1990, 2492
Insignia2049, 1423, 1564, 0171, 0463, 1204, 1326, 1517, 1660, 1963, 2417, 2751
Vizio1758, 2707, 0864, 1756, 0885
Zenith1423, 0178, 0047, 0017, 0463, 1661, 1365

How to Program a Charter TV Remote:1060bc2

Many difficulties may be solved by appropriately programming charter remote codes. This only takes a few minutes but may save you a lot of time in the long run. Before you begin, pay attention to the remote control and a few things that can help you program more quickly and easily. Important buttons, such as Settings and Power, may be found here. They keep you from trembling while you’re programming by preventing you from looking for them.

Charter remote control 1060BC2 is currently called Spectrum remote control. The best part is that it comes with self-installation instructions. These installations are done by the client, therefore if you want to install a Charter spectrum tv box, you must do so yourself.

Then it’s extremely probable that your remote control is malfunctioning. The charter universal remote control has several functions, including the ability to stop video/audio, rewind video/audio, fast forward, and other similar functions. Let us now discuss the programming instruction.

  • Enter the four-digit code on the device to program it. In the handbook, you’ll find this code. Alternatively, you can consult the instructions on the Spectrum website.
  • Turn on the gadget that has to be programmed.
  • Step-3 To configure a device with a VCR, DVD, or other device, press the relevant button on the remote control.
  • When the red indicator blinks twice, press and hold the Settings button.
  • Using the keypad on the right side of the remote control, enter the 4-digit Charter Remote Codes listed in the instructions / website.
  • When the device is switched off, the power button on the remote control should be left pressed. If it isn’t already switched off, go back to step 3 and configure the device with the Charter Remote Codes.

The following are the six basic stages for programming a gadget. You can do this every time you program the remote. All you have to do is adjust the buttons on the remote control to the programming you’re doing.

(Video) How to program newer Spectrum tv remote control for your TV. Works for all brands. LG, Samsung etc

With automated detection, program the charter remote control. Instead of leaving all codes, many current features include an automated detecting capability that allows you to test different Charter remote codes until you discover the perfect one.

How Does work:

  • To begin, turn on the device you’ll be using to remotely program paper. Plug it in if it’s a DVD player.
  • There are four buttons at the top of the remote control: TV, DVD, CBL, and AUX. Each key corresponds to a certain device (for example, AUX is for audio and video receivers as well as other devices not covered by the other three kinds of buttons: Blu-ray: for Blu-ray players and DVD players. Digital receivers, such as cable boxes, are covered by the TV CBL program.
  • Hold down OK / SEL and the device-specific buttons (TV, DVD, CBL, or AUX) for 3 seconds. At the same time, press the buttons. The LED turns on after 3 seconds and stays on for 30 seconds.
  • While the procedure is going, press CH or CH- to make the indicator light up. You can quit pushing the button after the gadget has been switched off. Press the power button and then another button on the remote control to see whether programming works.
  • If the issue remains, go back to step 3.6. Last but not least, tap one of the four buttons (TV, DVD, CBL, or AUX). On the device, the code is saved.

Program Charter Remote: 1060BC2

Stand-alone spectrum remote control is another name for the Charter 1060BC2 remote control. This is what the customer has set up. This will be your remote if you have your own Charter Spectrum set-top box. You may use the remote control to pause, rewind, advance, and record TV shows.

You may program the chartered remote control by pushing the button for the device you wish to program, then pressing the Settings button until the indicator appears on the remote control. Enter the code for your television, audio system, or DVD player. LG: 11423, 10856, 11178, Sony: 10810, 11685, Panasonic: 10810, 11685, Panasonic: 10810, 11685, Panasonic: 10810, 11685, Panasonic: 10810, 116

Samsung: 10812, 10766, and 10814, and Vizios: 11758, 10864, 10885. RCA’s 20522, 20571, 20717, Sony’s 20533, 20864, 21033, and Samsung’s 20490, 20573, and 20199 are all common DVD player codes. Additional remote charter codes may be found on the Charter Spectrum website at 1060BC2, a remote charter guide.
Press the “Power” button on the remote control after you’ve tried each code. When the gadget is switched off or on, the programming is complete. If it doesn’t work, try the code for your device and brand below.

(Video) How to program Charter Remote 1

Program Spectrum URC 2060 Remote:

The Spectrum URC 2060 is a “charter remote control” for TVs with automated programming. This means you won’t have to type in any program codes for the top ten television brands.

When the remote control light blinks twice, hold the “Settings” button and click the TV’s on/off button on the remote control to configure the remote control.

When the TV is turned off, press and hold the exact brand number of the TV, then release it. Using Insignia / Dynex TV 1, LG / Zenith TV 2, Mitsubishi TV 3, Panasonic TV 4, Philips / Magnavox TV 5, Samsung TV 6, Sony TV 8, Sony TV 8, Toshiba TV 9, Toshiba TV 9 and Vizio TV 0.

For programming various manufacturers of TVs, you may look for Charter remote codes. To do so, hold down the “Settings” button until it begins to flash, then hold down the “TV Power” button. Hold down the OK / Select button until the TV goes off. After that, it was successfully programmed to operate the television.

Program UE C4000/S4000 Remote:

Another frequency remote control is the Spectrum Universal Electronics C4000, which can control numerous devices such as music, DVD, and television.
This brand’s code can be used to program a specific gadget. On the remote control, press and hold the button for the device you wish to configure, then press and hold the “Settings” button until a double flash displays.

(Video) How to Program Charter Remote from list of codes that came with the remote

Enter the code for the device. 11758, 10864, and 10885 are common Vizio television codes, whereas 10810 and 11685 are common Sony television numbers. Magnavox 11866, 10802, and 11198 are Samsung television codes, whereas Magnavox 11866, 10802, and 11198 are Magnavox television codes.

Locate remote paper codes for various users. The C4000 Remote Control Guide is accessible on the Charter Spectrum website and contains information about televisions and gadgets. Press the “Power” button once you’ve tried all of the codes. Your TV is programmed on the remote control if this works. If that doesn’t work, try another Charter remote code.


If you’re a charter spectrum device fan, you’ll find all the codes for your model here. Go over this text one again and input the right suitable code from the list into your brand device. With this charter remote control, you may enjoy nonstop entertainment because it can operate numerous devices at once.

See also:

  • Dish Network Universal Remote Codes
  • Verizon Fios Remote Codes


Best Charter Remote Codes With Programming Instructions? ›

Recommended steps: Confirm remote control is on the correct mode: TV, CBL, DVD or AUX by pressing OK/Select or mode key buttons. Check or replace the batteries in your remote. Wait for the remote to process your request if your receiver is latent (delayed).

How do I program my charter spectrum remote? ›

Programming your Spectrum remote control for your TV
  1. Place two AA batteries into your remote.
  2. Turn on your TV.
  3. Locate the code for your TV manufacturer. ...
  4. Press the Menu and OK button at the same time, until the input button blinks twice.
  5. Press the TV power button on your remote just once.
May 11, 2022

What are the codes for Spectrum remote? ›

Spectrum Remote 1060BC2/1060BC3 Codes
  • Dynex – 11463, 11780, 11785, 11810, 12049, 12184.
  • Insignia – 11423, 11564, 10171, 11204, 11517, 11641, 11660, 11710, 11780, 11892, 11963, 12002, 12049, 12088, 12417.
Oct 6, 2022

Why is my spectrum remote not connecting to my TV? ›

Recommended steps: Confirm remote control is on the correct mode: TV, CBL, DVD or AUX by pressing OK/Select or mode key buttons. Check or replace the batteries in your remote. Wait for the remote to process your request if your receiver is latent (delayed).

Can you program any remote to any TV? ›

As long as your smart TV has an Infrared sensor (or whatever connection type your remote uses, like Bluetooth or Wi-Fi), your universal remote should work with it. But some universal remotes will control only your TV's power, volume, and channel up/down buttons.

How do you find the code for your TV? ›

To do this, use your TV's remote to navigate to Settings, and then select Support. Select About this TV; the model code will be displayed on this window. Once you've got the model code, you can find out more about your TV.

How do you program a remote? ›

  1. Power on the TV or other device you'd like to connect to.
  2. Insert batteries into your remote and point at the device.
  3. Press and release the correct device button on your remote for the device you're connecting. ...
  4. Now press the power button and the device button simultaneously.

How do I program my spectrum remote urc1160 to my TV? ›

To pair your remote and receiver:
  1. Press MENU on the remote.
  2. Select "Settings & Support" from the left menu shown on your TV.
  3. Select "Support" from the left menu.
  4. Select "Remote Control" from the center tiles.
  5. Select "RF Pair New Remote" from the center tiles and follow the TV on-screen instructions.

Is the spectrum remote a universal remote? ›

How to use Spectrum remote as universal remote? Only Universal CLIKR-5 can be used to control your TV, Blu-Ray player, media, and audio devices.

What does ABCD mean on remote? ›

You can set the A, B, C and D buttons on your Xfinity remote control to perform custom actions, including shortcuts to accessibility features. To return to the original functionality of the letter keys, simply press the letter key again.

What is the magic key on one for all remote? ›

The magic key is used to set up your URC-1625. In tv mode you will obtain the AV / Input function. In sat mode you will obtain the “TV/SAT” or “TV/DTV” function, if available on your original remote.

What are the codes for one for all remote? ›

Codelist TV
  • Acer 35561, 21222, 23456.
  • Acoustic Solutions 22666, 22312, 23456, 15556.
  • Acronn 26616.
  • ADL 16456.
  • AEG 25212, 22223, 22312.
  • Airis 26616.
  • Aiwa 44121.
  • Akai 31331, 21161, 35526, 33222, 14261, 23456, 11212, 41453, 22312, 25212, 11565, 11655, 15556, 21131, 22452, 22666, 35311.

Why won t my charter remote work? ›

Troubleshooting Steps

Replace your batteries. Make sure your Spectrum Receiver (cable box) is turned on. Change channels by pressing the buttons on your receiver (if available). Remove any objects (e.g. furniture) around your receiver.

How do I sync my spectrum remote to my TV remote? ›

To pair your remote and receiver using radio frequency:
  1. Press MENU on the remote.
  2. Select SETTINGS & SUPPORT from the left menu shown on your TV.
  3. Select SUPPORT from the left menu.
  4. Select REMOTE CONTROL from the center tiles.
  5. Select RF PAIR NEW REMOTE from the center tiles and follow the on-screen instructions.

Why won't my remote change channels on my TV? ›

On the remote control, press the Power button for three seconds. Reinsert the batteries, making sure they are inserted with the correct polarity (-/+), then see if the issue is resolved. If the issue is not resolved, remove the batteries again and leave them out for approximately 1 minute. Then, reinsert the batteries.

Which remote can control all TV? ›

You're reading
Universal TV RemotesApproximate Price
Neuronmart Universal Voice Remote ControlRs. 900
Gvirtue Universal for LG Magic Remote ControlRs. 1,600
Hybite Remote Control UniversalRs. 1,300
Earthma Universal Remote ControlRs. 400
4 more rows
Feb 22, 2023

Can I use a different brand TV remote on my TV? ›

The good news is: yes, you can use a universal remote with any TV sold today. To replace your TV's remote, you could buy a device-specific remote from your TV manufacturer, but this could prove expensive and is actually unnecessary.

Can you buy remotes to work on any TV? ›

What to Know. It's not necessary to purchase a device-specific remote as a replacement remote for one that's been lost. A Universal TV remote will work with any device model for almost all manufacturers and may be compatible with multiple devices.

How do I find my universal remote code? ›

Universal Remote Codes
  1. Locate the model and code list version by looking inside the battery compartment under the batteries or on the underside of the compartment cover.
  2. Identify and make note of the code list version (CL3, CL4, CL5 or CL6), then replace the batteries and/or compartment cover.

What is the 4 digit code for a Samsung TV? ›

Codes for Samsung TV Remote Control
4-digit codes4-digit codes5-digit codes
8 more rows
5 days ago

What is a TV PIN code? ›

A PIN (Personal Identification Number) is a specific password to access your Smart TV and is used for various functions such as installing and using apps. You can change the PIN or reset it if you have forgotten it.

How do you program a code? ›

The general steps for writing a program include the following:
  1. Understand the problem you are trying to solve.
  2. Design a solution.
  3. Draw a flow chart.
  4. Write pseudo-code.
  5. Write code.
  6. Test and debug.
  7. Test with real-world users.
  8. Release program.
Dec 31, 2022

How do I get the one for all remote setup without the code? ›

If you do not have a code for your device, then you can: Download and open the One For All Setup App on your smartphone (iOS & Android) and look up for your device. This Setup App gives you the full access to our code database, where you can download the latest codes for your device.

How do I program my spectrum RC122 remote to my TV? ›

Philips RC122
  1. Turn on the device, such as your TV, that you want the remote to operate.
  2. On your remote, press the corresponding device button [such as TV, DVD, CBL] and the SELECT/OK buttons simultaneously until all the device buttons blink twice.
  3. Point the remote at the device and press 9 9 1.

Is there an app for Spectrum remote? ›

The Spectrum Access app is available for download via the App Store on iOS devices (iPhones and iPads) and via the Google Play store for Android devices at no additional charge.

Can I use my phone as a TV remote for Spectrum? ›

On your phone, the app can also function as a remote when you've lost the TV clicker in the couch cushions again (it happens).

How do I program my URSU 8780l spectrum remote? ›

Turn on the device, such as your TV, that you want the remote to operate. On your remote, press the corresponding device button (TV, DVD, CBL) and the OK/SEL buttons simultaneously for three seconds. The device LED will light indicating that it is ready to be programmed.

What does C mean on TV remote? ›

C: When viewing live TV, use the C button to follow all games on TV with the X1 Sports App. Press the C button to launch and see scores, even while watching TV. See an example of how to access the Sports App.

What are the 4 colored buttons on a TV remote? ›

Typically, the remote's red, green, yellow, and blue buttons can be used for various functions depending on the device being controlled and the user's preferences. Here are some common uses of the buttons: Red button: This button is usually used to stop or cancel an action.

How do I use the letters on my TV remote? ›

Hold down SHIFT button on the remote control, then press CHARACTER button to select the character type. Please select "abc" (lowercase letters) or “ABC”(uppercase letters) character type. After select character type. Hold down SHIFT, then press HOME NETWORK repeatedly to select the "space" character.

What is the difference between magic remote and normal remote? ›

Magic Remote Control Unit allows for free pointing and clicking, as well as standard 5-way controls. Voice input and universal remote functionality are also provided. Conventional Remote Control Unit allows for standard 5-way controls, with additional physical keys as shortcuts to commonly used actions.

Do you need a magic key per person? ›

Each individual Magic Key Pass is valid for only one guest, so if three guests would like to become Magic Key holders, then each guest would need to purchase their own individual Magic Key pass.

How do I reprogram my universal remote to One For All? ›

The process is as simple as pointing the original remote towards the One For All remote, selecting a key on the One For All remote and pressing the key on the original. Repeat for each key you want to learn and from then on the One For All will do exactly what your original remote does!

How do I get my charter remote to work? ›

How to sync Charter remote to TV - Quick Walkthrough
  1. Look for your device code in the list shared underneath.
  2. Switch on the TV set you want to program.
  3. Press the Power key on your TV's remote.
  4. Hold the TV and SEL buttons till the LED blinks two times before you release it.
  5. Type in the code for your TV brand.
Sep 28, 2020

Where is the reset button on a charter cable box? ›

Locate the Reset button on the front or back of your cable box. Check along the front side of your cable box for a small circular button labeled Reset. If you don't see the button on the front side of your cable box, then check on the back panel near the power cords.

Where is the input button on a spectrum remote? ›

Top left: A circular button that switches the TV on or off. Top center: A circular button that switches video inputs.

How do I reset my charter TV remote? ›

Perform a Remote Reset
  1. Press and hold the TV button for a few seconds.
  2. Also, press and hold the OK button and release both buttons after a second.
  3. At this time, the TV, DVD, and AUX buttons will flash up. ...
  4. Simply press and hold the Delete button for three seconds. ...
  5. The Spectrum remote has now been factory reset.
Sep 13, 2022

How do you set up a remote? ›

Set up with your remote
  1. When your TV says, “Quickly set up your TV with your Android phone?” Use your remote to choose Skip.
  2. Connect to Wi-Fi. Your system may need time to update.
  3. Choose Sign in. Use your remote.
  4. Sign in to your Google Account.
  5. To finish setup, follow the on-screen instructions.

Which charter remote do I have? ›

If you're not sure which remote is yours, the model number may be listed on the inside of the battery cover.

How do I sync my TV volume? ›

Adjust the A/V Sync settings.

To do so, go into the "Settings" on your TV. Then select "Sound," or "Audio," Go into "Advanced Settings" or "Expert Settings." Locate "A/V Sync" or "Audio Delay" settings. Turn this feature on and then use the slider bar to adjust the A/V Sync.

Can a spectrum remote be used as a universal remote? ›

How to use Spectrum remote as universal remote? Only Universal CLIKR-5 can be used to control your TV, Blu-Ray player, media, and audio devices.

How do I fix my remote to change channels? ›

Remote control won't change TV channels
  1. Make sure there are no obstacles between the remote and your TV.
  2. Move closer to the TV and make sure the remote is pointed directly at the TV's front panel.
  3. Make sure the batteries are installed correctly.
  4. Try fresh batteries.
Oct 28, 2019

How do I reset my spectrum remote rc122? ›

To reset your remote:
  1. Press and hold the CBL + Select/OK buttons simultaneously until the remote lights flash twice . (This should take about five seconds.)
  2. Enter 9 8 1. The remote lights will flash three times.
  3. The remote should now be reset.

Why is my remote not responding to the TV? ›

However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries.

What are the 4 digit codes for a Vizio TV? ›

Remote Codes / Universal Remote
  • 2 Digit TV Remote Codes. ...
  • 3 Digit TV Remote Codes. 502. 627. 004. 113. 505. ...
  • 4 Digit TV Remote Codes. 1758. 0178. 1756. 0128. ...
  • 5 Digit TV Remote Codes. 10178. 10117. 11756. 01377. ...
  • 4 Digit Codes. 1517.
  • 5 Digit Codes. 31517.
  • 5 Digit Codes. If you still need help, Click Here to contact our Customer Support Team.

How do you manually program a remote? ›

Direct code entry
  1. Make sure the device you want to pair is powered on and that the remote has working batteries in it.
  2. Press and hold the appropriate device button. ...
  3. Enter the correct code for your device while continuing to hold the device button. ...
  4. Once the power button lights up again, you can release the device button.

How do I find the code for my TV remote? ›

Check for Remote Code in Your TV's Product Manual

If you lost the paper manual, don't worry. You can look at the rear panel of your TV and take note of the model and serial number. I've found taking a picture of it with my phone helps keep the information handy.


1. How to program new Spectrum UR3-SR3S-BH remote control
(noe arriaga)
2. Spectrum remote programming to TV with codes
3. Remote UR4U Prorgraming TV Setup & Instructions
4. Programming Charter Spectrum Remotes for the Sony TV
(Mark Wilson)
5. how to program spectrum remote to tv
(Tech Support - Best Solution for You)
6. Using Your Remote – 1060BC2 / 1060BC3
Top Articles
Latest Posts
Article information

Author: Ms. Lucile Johns

Last Updated: 19/06/2023

Views: 6156

Rating: 4 / 5 (61 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Ms. Lucile Johns

Birthday: 1999-11-16

Address: Suite 237 56046 Walsh Coves, West Enid, VT 46557

Phone: +59115435987187

Job: Education Supervisor

Hobby: Genealogy, Stone skipping, Skydiving, Nordic skating, Couponing, Coloring, Gardening

Introduction: My name is Ms. Lucile Johns, I am a successful, friendly, friendly, homely, adventurous, handsome, delightful person who loves writing and wants to share my knowledge and understanding with you.